CAT 7 S-FTP INFRALAN DUPLEX installatiekabel rol - CPR: Eca - 500 meter

Deze Cat 7 S-FTP stugge DUPLEX installatie kabel in de kleur oranje wordt op een 50m rol geleverd. Door de DUPPLEX uitvoering is deze kabel snel al paar te leggen. De kabel is geschikt voor netwerken tot 10Gbps. Het betreft hier een halogeen vrije, vlamvertragende en low emission kabel.

Specificaties

Application  

• Primär (Campus), Sekundär (Riser), Tertiär (Horizontal)
• IEEE 802.5; IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-T; ISDN; TP-DDI; ATM
• Standards     TIA/EIA 568 B-2.1; ISO/IEC 11801;EN50173; EN 50288-4-1, IEC 61156-5
• Flame resistance     Harmonised Standard: EN 50575
• Flame retardance: IEC 60332-1
• Halogenfree: IEC 60754-2
• Low smoke: IEC 61034
• EURO - Flame resistance class     Eca

Cable construction

• Conductor     Bare copper wire Ø 0.56 mm (AWG 23)
•  Insulation     Foam-Skin Polyethylen, Ø 1.35 mm
• Twisting     2 wires to the pair
• Pair screen     AL-laminated plastic foil
• Screen     copper braid, tinned
• Sheath     LSHF (FRNC), orange
• Printing     99980.x-CPR: „INFRALAN(R) Cat.7 1000 AWG23 S/FTP 4P EN50575 Euroclass Eca ISO/IEC11801 EN50173 “
  99980DX.x-CPR: „INFRALAN(R) Cat.7 1000 AWG23 S/FTP 4P EN50575 Euroclass Eca ISO/IEC11801 EN50173 “

Mechanical characteristics

• Bending radius     ≥ 40 mm without load
• ≥ 80 mm with load
• Temperature range     during operation -20°C bis + 60°C during installation 0°C bis + 50°C
• Electrical characteristics (at 20°C ± 5°C)
• Loop resistance     ≤ 165 Ω/km
• Resistance unbalance     ≤ 2%
• Insulation resistance (500 V)     ≥ 2000 MΩ *km
• Mutual capacitance at 800 Hz     nom. 43 nF/km
• Capacitance unbalance (pair/ground)     ≤ 1500 pF/km
• Characteristic impedance (1-100) MHz     (100 ± 5) Ω
• (100-250) MHz     (100 ± 10) Ω
• (250-600) MHz     (100 ± 15) Ω
• Nominal velocity of propagation (NVP)     ca. 79%
• Propagation delay     ≤ 427 ns/100 m
• Delay skew     ≤ 12 ns/100m
• Test voltage (DC, 1 min)
  • core /core und core/screen    1000 V
            Transfer impedance ( mΩ / m )     1 MHz     10 MHz     30 MHz     100 MHz
                                                                    20     30           40            200
                   

Technical data

• 4x2x0.56     2x(4x2x0.56)   
• Outer diameter 7.3 x 14.6 mm
• Fire load     1190 MJ/km 0.345 kWh/m    
• Weight     109.2 kg/km    
• Copper content     52    
• Tensile force     220 N